How Much to Reshaft a Golf Club (When and Why) 2022

If you’re considering changing the shafts on your golf clubs, there are many options for you to consider. There is a “pro” and “con” for each option, and I will discuss the cost difference in this post.

Typically, the cost of a golf club is determined by the type of shaft you want and the grips. A cheaper club usually comes around 10 dollars, but there are clubs that cost up to 400 dollars for drivers.

You can buy new grips and shafts for your golf clubs at prices that vary anywhere from $10 to $440 or more. The amount of money you spend will depend on the type of club.

In this article, you will learn all things about reshafting the golf club such as its process, its cost, why and when you should change the shaft of your golf club, and what are its advantages and disadvantages. 

How Much Does It Cost To Reshaft A Club?

How Much to Reshaft a Golf Club 1

When asking “how much is an iron set”, it is important to consider what you need. A cheap set of irons is only a few dollars, but 12x more expensive models can be necessary if you are a Newbee golfer, you should not spend a lot of money.

There are a lot of people who will pay someone else, rather than do it themselves. 

You can save yourself money by doing it yourself, but most people don’t have the tools or know how to do it. 

I looked at multiple stores and found out that the prices were different.

For example, Dick’s Sporting Goods had a price of $800 for a shaft and installation, whereas Golf Galaxy had a price of $600 for a shaft removal and installation.

Here are some examples of iron shafts: (source)

  • UST Mamiya Recoil Graphite: $39.99 each.
  • True Temper Command .370 Steel: $7.99 each.
  • KBS Max .355 Graphite: 79.95 each.
SERVICEPRICE
 Reshaft (Steel or Graphite) $15.00 plus the price of the shaft
 Reshaft (Bore Through) $25.00 plus the price of the shaft
 Customer Provided Reshaft Steel or Graphite $25.00 per shaft
 Customer Provided Reshaft Bore Through $35.00 per shaft

Tools Needed To Reshaft A Golf Club

Reshafting golf clubs follow a proper and certain process and the mechanism that you need to follow, and that is why you will need some tools to reshaft the golf clubs.

  • Dremel tool with a cut-off wheel
  • 2-part epoxy
  • sandpaper
  • q-tips
  • acetone
  • vice
  • shaft puller
  • leather gloves
  • electric head gun
  • new ferrule

These are the mandatory tools that you need while reshafting the golf clubs, and now let’s explore how to reshaft the golf clubs step by step.

How to Reshaft Golf Clubs?

Once you avail of the golf club reshafting tools, then you need to follow the process step by step that is mentioned below, and it will get you the change the golf club shafts successfully.

  • First of all, you need to make sure to find the shaft that fits the exact model of your current wheel. The most common shaft is 335″ but if you have calipers, you can measure the height.
  • Heat the hosel of your club until you’re able to twist and pull off the lead. You want to apply the heat around different parts of the club so that it heats evenly.
  • If there is a graphite shaft, it’s more difficult to take off because there will be resistance, and repeat the process but use a shaft puller and pull straight off.
  • If the shaft of your club breaks, use a handheld drill with an 8.6 bit to clean the hosel out.
  • Inside of the hosel, use sandpaper to clean it and wrap it around a dowel rod with a diameter smaller than the inside of the hosel. Finish by using acetone and a q-tip.
  • The most common length for golf clubs is 1 inch, with a range that goes from 1.25 inches to 0.85 inches.
  • For each club, consult a website, however, for the shaft on a 3 wood to be trimmed it should be trimmed 1 inch but for woods, you need to trim 2 inches for every club. Check with your club to see if this is the case.
  • To start, place the shaft in a vice and sand away the metal around it with a fine-grit sandpaper. After you are removing metal to create room for the insertion, you must remove all the paint without leaving any marks and use shoe polish motions to even out the surface when done.
  • Clean the tip and mix the epoxy, a specific type of epoxy is best for best results. Let it soak in for 24 hours to achieve maximum bond strength
  • If you’re struggling, try sliding the ferrule into the shaft. If you get it on your fingers, pour acetone onto it and rinse with soap afterward.
  • Coat the inside of the hole with glue, then put it in. Using a few tips (rotate), ensure that the glue is well distributed. Repeat on the other end. Rotate shafts around to coat both ends with glue and out again. Compare how evenly you’ve distributed the glue by seeing if any part has more or less than another.
  • Apply the grease to the shaft, then align it with the desired graphics before letting it sit for 24 hours. Next, apply some acetone onto a paper towel and hold the towel to the ferrule. Finally, remove any leftover epoxy from the hosel by scraping it with a knife.

Reason to Reshaft Your Golf Clubs

It’s rare to need to change your shafts so it’s not a concern – but when you do, it is necessary. 

Reshafting should only be considered if your swing has changed and regular shafts are broken.

If your clubs are fractured or broken, you may want to reshaft them. Fractures or dings can impact the performance of your club.

If you find that your swing is changing, make sure to reshaft because stiffer shafts might be necessary. 

When you get better at golf, you can generate more speed and a stiffer shaft might be necessary.

Overall, there is no need to replace your shafts. If you have the money, go ahead, but if not changing will be just fine.

When to Reshaft Your Golf Clubs

The first time you need to reshaft your golf clubs is when the shaft breaks. If the shaft breaks, then it’s beyond repair and you’ll need to replace it.

You should change your clubs if your ball flight changes dramatically, even if you connect with the club’s “sweet spot.”

New golfers may need new shafts any time they have changed their swing mechanics. This might be due to them.

For example, getting fitted for a new set of clubs. As they spend more time on the course, they may outgrow their new shaft. 

There are times when the player will need something different from their current design, like a heavier or lighter shaft, to achieve the desired results.

Pros and Cons of Reshafting A Golf Clubs

Well, there are advantages and disadvantages both when you reshaft a golf club.

You need to keep both aspects in your mind, and if the pros are more than the cons in your case, you should reshaft your favorite golf club, or else, use the regular one.

Pros

  • Can improve the performance of your clubs
  • Can save money in the long run
  • Can extend the life of your clubs
  • Can customize the weight, flex, and grip of your clubs
  • Can improve your golf game
  • Reshafting changes the flex of the shaft to better suit your swing
  • Golf club reshafting changes the weight and balance of the club
  • If you reshaft the golf club, it will look like new again
  • The process of reshafting is easy and quick

Cons

  • Reshafting can be expensive
  • It can void the warranty on your club
  • You don’t need to reshaft your golf club if it is in the good condition
  • Finding a qualified professional for reshafting clubs can be difficult for you
  • It’s a little bit risky because your club could be damaged while the reshafting process

Final Words on How Much to Reshaft a Golf Club

There is no definitive answer to how much it costs to reshaft a golf club.

It depends on the type of club, the quality of the shaft, and the labor involved.

However, you can expect to pay anywhere from $40 to $200 for a professional reshafting job.

If you are looking to save money, you can try doing it yourself, but be aware that it is a delicate process and requires special tools.


FAQs:

Q1: How long does it take to reshaft irons?

Ans: Well, different people use different methods to reshaft the irons and golf clubs, on average, it can take about one hour if you follow the step-by-step process.

Q2: Is it worth it to Reshaft golf clubs?

Ans: In addition to reshafting, regripping and replacing worn-out grips can help keep your clubs performing at a high level. Replacing the golf shaft on your favorite clubs can be better than upgrading them automatically.

Q3: Is Reshafting old irons worth it?

Ans: With Iron shafts, it is worth the money to reshaft them if they are broken or if the shaft does not suit your swing style.

Sharing Is Caring:

Hello Golfers, This is Shan a full time blogger and a golfer enthusiastic person. He loves to share his learning and experience through this blog.read more

Leave a Comment